Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat.4006 - Web Based Management Console ???

Hi anyone pls clarify as I have a Cat.4006 with a Supervisor Eng. II and a 6-port Fiber Module installed.

I have configured an IP address to it by the following command;

console>(enable)set interface sc0 10.0.1.1 255.0.0.0 10.0.1.255

.

.

.

When I used my IE from another workstation to connect to the Cat 4006 by using its IP address configured as above, the IE shows a help page to link to the following help URL;

www.cisco.com/cco

.

.

.

and it 's never showing the Switch WEB BASED MANAGEMENT Page. Why is it so ? Anything wrong with my IP configuration above ?

Please help out.

thank you.

4 REPLIES

Re: Cat.4006 - Web Based Management Console ???

You might want to additionally give the following command,

set ip http server enable

Use show ip http for verifying the configuration.

New Member

Re: Cat.4006 - Web Based Management Console ???

Hi Sir, I did have specified the command "set ip http server enable" in the Cat.4006.

How do I confirm the IOS run by the Cat.4006 ? As I understand, the Cat.4006 might be running the Cisco Integrated IOS (Native Mode) or CatOS.

When do I need to configure the Management Ethernet Interface (me1) ?

Please help out.

Re: Cat.4006 - Web Based Management Console ???

For the cat 4000, cisco doesnt ship the Catalyst web interface bundled in the Image.The CWI (cat web int) is a totally separate image that needs to be downloaded. Check software center at cisco to download the image. Hope this is of help

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_10697.htm#xtocid0.

Cisco Employee

Re: Cat.4006 - Web Based Management Console ???

Sup2 cannot run native IOS. So I belive you have Sup2. To enable web interface, you also need cv image in the bootflash. The following page should help

http://www.cisco.com/warp/public/473/105_15954.shtml

323
Views
0
Helpful
4
Replies
CreatePlease login to create content