Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

cat 4507, sup 1v

I got a brand new 4507, with sup1v on it. The swtich came with a 12.1.13 EW image on the bootflash. Looking at the 4507 documentation, I see that there is a Basic as well as Enhanced image for the 12.1.13. But both has the same image name (cat4000-is-mz.121-13.EW), according to this document.

http://www.cisco.com/warp/public/cc/pd/si/casi/ps4324/prodlit/1999_pp.htm

So how do I find whether I have the basic image or the Enhanced image on the sup.

One thing I see is that the Enhanced image has OSPF, EIGRP ISIS support on it.

When I look at the switch, I am able to configure OSPF, EIGRP, ISIS etc, which makes me believe that I have an enhanced image on board.

The switch also came with a software bundle part number S4KL3E-12112EW and it says its enhanced L3 SW for C4000. I want to make sure whether I need to load this image, or send it back.

Thanks

1 REPLY
Cisco Employee

Re: cat 4507, sup 1v

The file is the same for basic and enhanced upto 12.1(13)EW, but you will have to purchase license to run enhanced.

Beginning 12.1(19)EW, the images are different for basic and enhanced

The file for enhanced feature set is

cat4000-i5s-mz.121-19.EW.bin

while that for basic image is

cat4000-i9s-mz.121-19.EW.bin

95
Views
0
Helpful
1
Replies
CreatePlease to create content