Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat 5513 error message

Hi,

Could anyone tell me what this error means?

2004 Apr 05 21:55:24 %SYS-3-P2_ERROR: 3/C5man: Gigmac Link B, Mac rcv sync loss error, status reg is: 0x00

2004 Apr 05 21:55:28 %SYS-3-P2_ERROR: 3/C5man: Gigmac Link A, Mac rcv sync loss error, status reg is: 0x00

2004 Apr 05 21:55:29 %SYS-3-P2_ERROR: 3/C5man: Gigmac Link B, Mac rcv sync loss error, status reg is: 0x00

2004 Apr 05 21:55:33 %SYS-3-P2_ERROR: 3/C5man: Gigmac Link A, Mac rcv sync loss error, status reg is: 0x00

One of our Cat5513 is sending these errors, but I'm not sure what it means....

Thank you

Dong

3 REPLIES
Cisco Employee

Re: Cat 5513 error message

Your WS-X5410 is bad and will need to be replaced. Open a TAC case if you have a service contract

New Member

Re: Cat 5513 error message

Hi,

Thanks for your replay.

I have three other Cat 5500 switches connected to WS-X5410 and they don't seem to have any problem.

Would it be a bad WS-5534-GESX module??

Thank you

Dong

Purple

Re: Cat 5513 error message

You might try doing a reset on the module first to see if that helps at all , make sure diags are set as complete , this will then tell you if you have a hardware problem .

90
Views
0
Helpful
3
Replies
CreatePlease login to create content