Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cat 6500 not recognizing cards

I have 4 6148A-45F, in slots 1,2,3,4.

When i boot the switch they do not show up in the config and i get an error message when the switch is booting up which says

NO IDB allocated for unsupports cards???

Any ideas?

Thanks

7 REPLIES

Re: Cat 6500 not recognizing cards

Can you paste a sh version out of the switch ?

New Member

Re: Cat 6500 not recognizing cards

Sure. Any help would be highly appreciated. I have 1 sup with native and 1 sup with hybrid, the switch boots fine with hybrid and i see the ports but with err-disable state for the first 2 slots.

Cisco Employee

Re: Cat 6500 not recognizing cards

New Member

Re: Cat 6500 not recognizing cards

is this card supported with a sup2?

WS-A6148A-48af

Re: Cat 6500 not recognizing cards

Hi,

Yes, it is supported With sup 2, it a clasic line card.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet0900aecd8017376e.html

regards,

-amit singh

New Member

Re: Cat 6500 not recognizing cards

Amit,

Can you tell me the version (NATIVE), i should run in sup2 for it to reconize the line card.

WS-A6548A-45AF.

Thanks

Cisco Employee

Re: Cat 6500 not recognizing cards

I'm not sure if you mean WS-X6148A-GE-45AF or WS-X6548-GE-45AF.

WS-X6148A-GE-45AF is currently only supported in Native IOS with the sup720 and sup32 in 12.2(18)SXF

WS-X6548-GE-45AF is supported as of 12.2(17d)SXB in Native IOS for the sup2

Documented here:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2563113

375
Views
5
Helpful
7
Replies