Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

Hi,

Is WS-X6148-GE-TX (10/100/1000 48-port RJ 45) compatible with Cat 6500 Sup Engine 1?

Thanks,

jonathan

7 REPLIES
New Member

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

New Member

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

sorry i can't find anything in the link that says Sup Engine 1 is the same as Sup Engine 1A.

The docs i've seen says that 10/100/1000 can be operated on sup Engine 1A, 2, and 720. It doesn't explicitly says about compatibility with Sup Engine 1. That's where i get confused. I know that Sup Engine 1 is different product than Sup Engine 1A.

Can anybody from Cisco shed some light?

Thanks,

Jonathan

New Member

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

um ... from my understand

6500 series doesn't has "sup 1" it has "sup 1a". (6500 is lastest of 6000)

6000 series has "sup 1" and it end-of-sale already.

end of sale

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin09186a00800923d9.html

6500 series info

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_brochure09186a00800923b5.html

6000 series info

http://www.cisco.com/en/US/products/hw/switches/ps700/products_installation_guide_chapter09186a0080123ecd.html

to ensure which module are you using is to 'sh module' at the switch, then you will get the correct part number from there

for other problem, I think, you better ask CISCO vendor near you (if they cannot answer you, they will forward your question directly to CISCO engineer), it's better than waiting for the answer here.

New Member

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

a! sorry ... 'sh ver' is better from this question ...

New Member

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

Here's what i got from show version:

WS-C6509 Software, Version NmpSW: 6.3(3)

Copyright (c) 1995-2001 by Cisco Systems

NMP S/W compiled on Oct 29 2001, 16:50:33

WS-X6K-SUP1-2GE >> Sup Model

Is it Sup Engine 1 or Sup Engine 1A?

Thanks.

Cisco Employee

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

WS-X6K-SUP1-2GE is a Sup1

A sup1a would have a model number like:

WS-X6K-SUP1A-MSFC

WS-X6K-SUP1A-2GE

To answer the original question, the WS-X6148-GE-TX is supported in 7.6(1), regardless of supervisor type.

You can check hardware/software compatibility in the release notes which are at

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#20834

New Member

Re: Cat 6500 Sup Engine 1 compatibility with WS-X6148-GE-TX

thank you.

now, I realize how to read 'release notes'. ;)

171
Views
5
Helpful
7
Replies
CreatePlease to create content