Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CAT 6509 SWITCH PINNACLE ERROR

Hi,

In one of cisco 6509 switch i am receving pinnacle error in almost all the modules. Not able to find any solution. Please find below the error message.

===========================================

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 1: Pinnacle #0, Frames

with Bad Packet CRC Error (PI_CI_S_PKTCRC_ERR - 0xC7) = 896: Module needs trou

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 1: Pinnacle #1, Frames

with Bad Header Checksum on DBus (PI_CI_S_HDR_FCS - 0xC5) = 63: Module needs t

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 1: Pinnacle #1, Frames

with Bad Packet CRC Error (PI_CI_S_PKTCRC_ERR - 0xC7) = 896: Module needs trou

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 2: Pinnacle #0, Frames

with Bad Header Checksum on DBus (PI_CI_S_HDR_FCS - 0xC5) = 63: Module needs t

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 2: Pinnacle #0, Frames

with Bad Packet CRC Error (PI_CI_S_PKTCRC_ERR - 0xC7) = 896: Module needs trou

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 3: Pinnacle #0, Frames

with Bad Header Checksum on DBus (PI_CI_S_HDR_FCS - 0xC5) = 63: Module needs t

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 3: Pinnacle #0, Frames

with Bad Packet CRC Error (PI_CI_S_PKTCRC_ERR - 0xC7) = 896: Module needs trou

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 7: Pinnacle #0, Frames

with Bad Header Checksum on DBus (PI_CI_S_HDR_FCS - 0xC5) = 63: Module needs t

2005 Oct 21 15:59:13 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 7: Pinnacle #0, Frames

with Bad Packet CRC Error (PI_CI_S_PKTCRC_ERR - 0xC7) = 896: Module needs trou

2005 Oct 21 15:59:14 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 9: Pinnacle #0, Frames

with Bad Header Checksum on DBus (PI_CI_S_HDR_FCS - 0xC5) = 63: Module needs t

2005 Oct 21 15:59:14 GMT +05:30 %SYS-3-SYS_LCPERR3:Module 9: Pinnacle #0, Frames

with Bad Packet CRC Error (PI_CI_S_PKTCRC_ERR - 0xC7) = 896: Module needs trou

===================================

I have done a supervisor engine switchover. Even after that i am receving this error message.

Please let me know the solution if anybody had solved this problem.

Krishna.

1 REPLY

Re: CAT 6509 SWITCH PINNACLE ERROR

406
Views
0
Helpful
1
Replies
CreatePlease login to create content