07-14-2003 02:10 AM - edited 03-02-2019 08:50 AM
Hello Guys,
i am trying to configure the cat6509 and get this Prob:
the layer 3 Modul is giving me this prompt: router (boot)#
after rebooting the switxh i am not ´more able to connect to layer 3
SW01-6509GL7-11> (enable) session 15
Trying Router-15...
session: Unable to tunnel to Router-15 (57)
please helb me
Alain
07-14-2003 02:27 AM
Hello Alain
Try to use the command "switch console" or "swith console 15" , you have to be directly connected to the sup console to do this. If you reset the mod 15 just before switching console you can see the startup.
Regards
Mike
07-14-2003 02:32 AM
Hello Mike,
thanks for replaying me. I try the command "switch console 15" and get this message
%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/flash:c6msfc2-is-mz.121-2.E No usable interfaces.
Sleeping for 300 secs before next netboot attempt
but no connection
Thanks for any help
Alain
07-14-2003 04:04 AM
Issue a "reset 15", then "switch console" in and send a break sequence to break into rommon. You might have to recover MSFC using procedures in the following tech tip
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide