Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cat Express 500 Auto-MDIX

I am trying to connect a Cat 500 Express to a 2950, using a stright-through cable.

If I enable auto-mdix on the Cat 500, I have to enable auto speed and duplex settings.

If I do this, I get a duplex mismatch.

Can i set the auto-mdix to work, without having to auto-negotiate the speed and duplex settings ?

On the 2950, the settings are 100/full

Thanks

2 REPLIES
Silver

Re: Cat Express 500 Auto-MDIX

MDIX is not related to duplex and speed. You should be able to set the MDIX auto and hard code the speed and duplex if you want.

Regards,

Re: Cat Express 500 Auto-MDIX

BY default CE-500 is auti-mdix & u need not make any changes on duplex settingz. bcoz i never faced such problem by connecting my CE-500 to 2950, juz a straight cable connecting from CE-500 gigabit to 2950 gigabit. thatz it, i didn't get any duplux mismatch, try to check once again in 2950 that every thing is set auto(duplex & speed)

170
Views
5
Helpful
2
Replies
CreatePlease to create content