I have use the feature navigator and have found out to use NAC2 features (such as posture validation of an client machine), we need to have either IOS (which mean Cat4006 SupII+ and above) or Cat6000 platform running Cat8.5.x version.
It's look like Cat4006 Sup2 (CatOS) is not capable to support NAC-2 (need to do posture validation). Can someone confirm this?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...