Cat4006 SupIII promupgrade

ROLAND MARTI · ‎10-30-2002

what's is the real size of the promupgradefile for cat4006 Sup III version 121_12r_EW file ?

On the releasenotes is about 2MB

see output below

Step 4 Download the cat4000-sup3-promupgrade-121_12r_EW program into Flash memory using the copy tftp command.

The following example shows how to download the promupgrade image cat4000-sup3-promupgrade-121_12r_EW from the remote host 172.20.58.78 to bootflash:

Switch# copy tftp: bootflash:

Address or name of remote host [172.20.58.78]?

Source filename [/home/rommon/4014rommon]? cat4000-sup3-promupgrade-121_12r_EW

Destination filename [cat4000-sup3-promupgrade-121_12r_EW]?

Accessing tftp://172.20.58.78/ cat4000-sup3-promupgrade-121_12r_EW...

Loading cat4000-sup3-promupgrade-121_12r_EW from 172.20.58.78 (via FastEthernet2/1)

:!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 2006316/4012032 bytes]

2006316 bytes copied in 20.936 secs (100315 bytes/sec)

Switch#

and on the SW libary is the file 12.1(12r)ew only 586k and the 12.1(11br)EW 1072k

see output from SW libary

Catalyst 4000 ROMMON

Sort by : FilenameReleaseDateSize

Filename Release Date Size (Bytes)

cat4000-sup3-promupgrade-121_12r_ew

Catalyst 4000 Supervisor III ROMMON upgrade 12.1(12r)ew 18-SEP-2002 586868

cat4000-sup3-promupgrade-121_11br_EW

Catalyst 4000 Supervisor III ROMMON upgrade 12.1(11br)EW 06-MAY-2002 1072184

smahbub · ‎11-05-2002

I have checked in the Software center, its the same as you had mentioned for cat4000-sup3-promupgrade-121_12r_ew and cat4000-sup3-promupgrade-121_11br_EW.

I think the software library has got corrupted, You should again upload the file in software library.