Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat500/RSFC and Token-Ring Routing

Hi All,

I once configured a Cat5505 with a SupII and RSM for inter vlan routing using token-ring. This worked well.

However, I now have a Cat5505 with a SupIII and RSFC. Are the config details the same? Certain commands don't seem to work, such as:

int vlan100 type trbrf

multiring all

Anyone got any ideas? All the config tips at Cisco seem to cover only the RSM and not the RSFC....

1 REPLY
Bronze

Re: Cat500/RSFC and Token-Ring Routing

The RSFC does not support token ring VLANs. This means that you will either need to install a RSM to get the token ring vlan functionality or you will need to use an external router with both token ring and ethernet connections to route between the token ring and vlan. The RSM is the only route switch module which will support token ring vlans.

78
Views
0
Helpful
1
Replies