Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat5000 Boot ROM

Hi,

If anyone can help me with regards to part number of the NMP boot ROM 5.1(2) and the MCP boot ROM 4.3(1). I need to upgrade the existing Boot ROM of our Cat5000 for the support on the old network of our client. Can somebody please help me on this issue?

Thnak you very much.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cat5000 Boot ROM

hi

you can make use of show version command and find out the current version of both nmp & mcp boot rom and plan accordingly for upgrading the same to the latest version ..

http://www.cisco.com/en/US/products/hw/switches/ps679/products_installation_and_configuration_guide09186a008007ecd1.html#wp5597

regds

4 REPLIES
New Member

Re: Cat5000 Boot ROM

Hi,

Thank you for your reply. I already saw this article on Cisco web site. What I need is the exact Part number of the Boot ROM.

Regards

Re: Cat5000 Boot ROM

hi

you can make use of show version command and find out the current version of both nmp & mcp boot rom and plan accordingly for upgrading the same to the latest version ..

http://www.cisco.com/en/US/products/hw/switches/ps679/products_installation_and_configuration_guide09186a008007ecd1.html#wp5597

regds

New Member

Re: Cat5000 Boot ROM

Hi,

Thank you very much for the help. I found already the exact part number. The link that you send will be helpful for me too.

Thanks again.

Regards

101
Views
0
Helpful
4
Replies
CreatePlease login to create content