Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CAT5505 with HSRP on RSM

Hi

I'd liked to know if there are any limitations with having multiple standby groups on a per vlan basis under MLS i.e.

On CAT5505 #1

interface Vlan11

ip address 11.1.1.1 255.255.255.0

no ip redirects

standby 11 ip 11.1.1.3

standby 11 priority 120

standby 11 preempt

standby 12 ip 11.1.1.4

standby 12 priority 100

standby 12 preempt

On CAT5505 #2

interface Vlan11

ip address 11.1.1.2 255.255.255.0

no ip redirects

standby 11 ip 11.1.1.3

standby 11 priority 100

standby 11 preempt

standby 12 ip 11.1.1.4

standby 12 priority 120

standby 12 preempt

Reason being, i want to have 2 virtual gateways (11.1.1.3 & 11.1.1.4), for load balancing reasons etc.

We are currently running with this setup on 3600 series routers at the moment, but i'm not sure if this same setup is possible on a MLS environment.

Thanks

1 REPLY
New Member

Re: CAT5505 with HSRP on RSM

sounds good.but i dont know wheather it is passive effect.

71
Views
0
Helpful
1
Replies
CreatePlease to create content