I have CAT6509 with dual SUP in it, it was all working until now and now i cant ping/telnet to the management console of the supervisor. I can't even ping it from the MSFC part (wierd) or anywhere from the network. I was able to console into the switch and everything seems to be okay and I was able to ping devices on the network. I know that reboot would help but in my environment it is hard to get approval for reboot, anyone has any suggestion without a reboot?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...