11-28-2001 07:31 PM - edited 03-01-2019 07:32 PM
Can I connect two 2950C-24 switches with 100base_FX ports.
Can any one please assist me in this.
Thank you
11-29-2001 08:43 AM
Yes you can. All you need is a fiber patch cable with SC connectors. Unless they are in different locations, then you will need 2 fiber patch cables. If you don't get a link light at first switch the connectors. Example if the connectors are red and black. Plug the black in the left port and the red in the right port. Make sure that the other end of the fiber connection is reversed. Red then Black. Hope this helps. Email me at bolds@trammellcrow.com if you have any other issues, I might be able to help.
11-29-2001 02:49 PM
Thank you very much .
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: