Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Catalyst 2950C-24 switches

Can I connect two 2950C-24 switches with 100base_FX ports.

Can any one please assist me in this.

Thank you

2 REPLIES
New Member

Re: Catalyst 2950C-24 switches

Yes you can. All you need is a fiber patch cable with SC connectors. Unless they are in different locations, then you will need 2 fiber patch cables. If you don't get a link light at first switch the connectors. Example if the connectors are red and black. Plug the black in the left port and the red in the right port. Make sure that the other end of the fiber connection is reversed. Red then Black. Hope this helps. Email me at bolds@trammellcrow.com if you have any other issues, I might be able to help.

Bronze

Re: Catalyst 2950C-24 switches

Thank you very much .

118
Views
0
Helpful
2
Replies