Has anyone got a working config using CSUF on a stack of Cat 3500XL's using 802.1q trunking on the Stacking Ports with a native-vlan that isn't VLAN-1 - and it working?
I do not have any kit to test this on at the moment and recall we couldn't get this working cleanly in the lab. Latest release notes for the Cat 2900XL/3500XL (12.0(5)WC5) states there is an open caveat that has existed in all 12.0(5)WCx releases and doesn't work (CSCdv50479) and there is no workaround.
Any information regarding this would be appreciated.
Surely someone has some Cat 3500XL's installed using GigaStack GBIC's in a multi-drop configuration (more than 2....) - I need to know whether anyone has managed to get CSUF working with the Stack-Ports as 802.1q trunks, trunking three VLAN's with the Native VLAN set to something other than VLAN 1.
When debugging this and removing the STP forwarding link to the Core the other switches in the Stack didn't reply to the poll sent out and normal STP recovergence occurred.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...