Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Catalyst 3548XL with Intel Pro 10/100

Is there any incompatibility with this kind of NIC Card at 100 Meg?

3 REPLIES
New Member

Re: Catalyst 3548XL with Intel Pro 10/100

I think it's compatible. However, sometimes I found that Cisco autonegotiation with some 10/100M network card would choose 10M and half-duplex. If so, set the Cisco port with 100M and full-duplex instead of autonegotiation.

Cisco Employee

Re: Catalyst 3548XL with Intel Pro 10/100

You can check for any compatibility issues on CCO at

http://www.cisco.com/warp/public/473/46.html

New Member

Re: Catalyst 3548XL with Intel Pro 10/100

Thanks to all for your answers!

I already check all recommandations described in the document referenced for

the NIC compatibility issues.

... all these tests ended badly. There was a little gain with the

parameter carrier-delay set to 4 but still the link goes down.

My port setting is Full duplex and 100 Meg Speed.

With 10 Meg I didn't have any problems! Any Idea of what can be wrong?

98
Views
0
Helpful
3
Replies
CreatePlease to create content