Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 3750 PS Master Configuration

Hi

I am hoping that someone might be able to help me out with configuraing the master switch and seconary master.

I have checked out the doco and it is a bit vague

What are the commands to configure that master and secondary master on the cat 3750 when you are cascading using stackwise ?.

Also does the master switch automatically become the root bridge for spanning tree ?.

Your help would be greatly appreciated

Best Regards

1 REPLY
New Member

Re: Catalyst 3750 PS Master Configuration

The master election is done automatically, but you can use switch priorities to affect who becomes the stack master.

Use the "switch priority" command to do this, but you need to reload the stack after this.

http://cco.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12119ea1/3750cr/cli2.htm#2252047

Spanning Tree is independent, you set the root as you like.

Hope this helps,

Martin

164
Views
0
Helpful
1
Replies
CreatePlease login to create content