05-29-2003 09:08 PM - edited 03-04-2019 02:52 AM
Hi all,
I have trouble :
I configured VLAN interfaces for catalyst 4006 (VLAN 2, VLAN 3, VLAN 4, VLAN 5, VLAN 6) , each interface have one network IP address, the networks routing by RIP.
The Catalyst 4006 runing normaly.
But today i can not ping VLAN 6, after sh VLAN Interface i saw that:
VLAN interface up , line protocol down,
VLANs remain is normaly
I don't understand why ?
Pls help me resolve this problem.
Thank you very much
Hung, CCNA, Fujitsu
05-29-2003 10:35 PM
What version of OS are you using? Are you still using separate CatIOS for the Catalyst and IOS for the router/L3 routing module?
05-29-2003 11:50 PM
Thanks
My Catalyst use
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(8a)EW1.
I know this old version, I don't know this version effect to catalyst activity .
Thanks for help me.
see you
05-29-2003 10:36 PM
BTW, I'm running Cat4006 with L3 routing module (and also external 3662) router at the moment so I can most probably help you out with your problem.
05-30-2003 11:36 AM
Do you have any active ports in VLAN6? If not the L3 VLAN interface will shut down due to auto-state
06-06-2003 12:31 AM
Hi,
You need to create the vlan in the vlan database.
Please do.
conf t
vlan 1-6
state active
end
Regards
Ian
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: