Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

catalyst 4500 Ethernet and fibre channel passthru

dear sir,

anyone have any idea / documentation showing that the belows device 1.) & 2.) can support Ethernet and fibre channel passthru ? thanks.

1.) WS-X4424-GB-RJ4 (Catalyst 4500 24-port 10/100/1000 Module (RJ45)

2.) WS-X4306-GB (Catalyst 4500 Gigabit Ethernet Module, 6-Ports (GBIC)

5 REPLIES
Silver

Re: catalyst 4500 Ethernet and fibre channel passthru

Could you explain more about the exact requirement ?

WS-X44240GB-RJ45 is a RJ-45 interface module. Cannot support fibre.

WS-X4306-GB is a SC fibre interface module, support fibre and Ethernet only.

Both are Ethernet module and I believe both cannot support fibre channel (passthru).

Hope this helps.

New Member

Re: catalyst 4500 Ethernet and fibre channel passthru

hi jackyoung,

thank you for good reply, any documentation that talks about that?

Silver

Re: catalyst 4500 Ethernet and fibre channel passthru

You're welcome. Check below for the module info. And there is description about support of fibre channel passthru.

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet0900aecd802109ea.html

You can also seach Cisco web for more info.

Hope this helps.

Silver

Re: catalyst 4500 Ethernet and fibre channel passthru

Sorry. It should be there is NO description of the support of fibre channel passthru.

New Member

Re: catalyst 4500 Ethernet and fibre channel passthru

it's ok.thank you for reply.

540
Views
9
Helpful
5
Replies
CreatePlease to create content