Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

catalyst 4500 support nat?

hi everybody

could you pls tell me that is there any ios that support nat in 4500 switches?

6 REPLIES

Re: catalyst 4500 support nat?

Hi Ladan,

Its not supported on cat4500 series.

Have a look at this link

http://www.cisco.com/warp/public/473/166.html#topic1

Only exception is Catalyst 4500/4000 series switches with Supervisor Engine III/IV support the Access Gateway Module (AGM) in Cisco IOS Software Release 12.1(13)EW or later. You need Cisco IOS Software Release 12.2.13T or later on the AGM module. NAT has support in the software switching path on the AGM module.

HTH, if yes please rate the post.

Ankur

New Member

Re: catalyst 4500 support nat?

Hi ankurbhasin

thanks for your help. someone told me that ios software release 12.4 support NAT on 4500. could you tell me about this subject?

thanks

Re: catalyst 4500 support nat?

Hi Ladan,

AFAIK there is no such release for cat4500 switch and the latest release for 4500 switches is Cisco IOS Software Release 12.2(31)SG

Check this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/index.htm

HTH, if yes please rate all post.

Ankur

Purple

Re: catalyst 4500 support nat?

Hi,

NAT is not supported on the 4500 series, in any IOS version.

Hope that helps - pls do remember to rate posts that help.

Paresh

Purple

Re: catalyst 4500 support nat?

Hi Ladan,

The Cat4500s do not have any 12.4 software at all. The latest you can get is 12.2...

Paresh

New Member

Re: catalyst 4500 support nat?

thanks too much

I found it.

1101
Views
18
Helpful
6
Replies