05-04-2006 09:35 PM - edited 03-03-2019 03:05 AM
I am with a Catalyst 4506 without ios, and in rommon. How to insert ios in an one supervisor 2 catalyst 4506?
Solved! Go to Solution.
05-04-2006 09:55 PM
Hi Friend,
You can simple change the entries overwritting the old one like
IP_ADDRES=10.10.10.10 or if you waan a clear entries you can use
IP_ADDRES=
and hit enter
Make sure you are using all capital letter where required.
HTH
Ankur
05-04-2006 09:38 PM
Hi Friend,
Have a look at this link it may resolve your issue.
http://www.cisco.com/warp/public/473/26.html#cat4k
HTH, if yes please rate the post.
Ankur
05-04-2006 09:43 PM
Hi thanks..
Ok, how to clean these lines? I tried to make one tftpdnld without success.
PS1=rommon ! >
IP_ADDRESS=10.130.1.7
MemorySize=128
ResetCause=6
TmpfsAddr=2270167040
TmpfsSize=7340032
TmpfsDirectorySize=10240
DiagFreePageLimit=29952
AutobootStatus=fail
IP_ADDRES=10.130.1.3
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=10.130.1.2
TFTP_FILE=c4gwy-cboot-mz.122-13.T16.bin
TFTP_SERVER=10.130.1.2
DiagBootMode=post
?=0
ROMVERSION=6.1(5)
05-04-2006 09:55 PM
Hi Friend,
You can simple change the entries overwritting the old one like
IP_ADDRES=10.10.10.10 or if you waan a clear entries you can use
IP_ADDRES=
and hit enter
Make sure you are using all capital letter where required.
HTH
Ankur
05-04-2006 11:04 PM
Hi friend.
Thanks for the help, went up the equipment!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: