Catalyst 5000 - Cannot Upgrade CatOS due to config-register setting?
We are trying to upgrade the CatOS versions on our switches to an SSH compatible version. It seems that some time ago, someone locked down the switches in order to prevent changes to the config, by changing the config-register. Also, when I am in the switch, I cannot download any images to the switch (CatOS images), cannot do a show boot, or issue the dir command. This is irregardless of the CatOS version currently on the switches. I also tried to go into ROMMON mode, and am unable to do it either. I have used different hyperterminal clients, and various key sequences to get in, but they don't work. If anyone can provide any type of information, please let me know.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...