We have a catalyst 5505, and we are installing a modulo WS-x5237-fx-mt the problem is that the modulo appears like unknow in the system. I enclose an estatus
of what shows
WS-C5505 Software, Version McpSW: 5.2(1) NmpSW: 5.2(1)
Copyright (c) 1995-1999 by Cisco Systems
NMP S/W compiled on Sep 30 1999, 17:23:24
MCP S/W compiled on Sep 30 1999, 17:19:44
System Bootstrap Version: 3.1.2
Hardware Version: 1.0 Model: WS-C5505 Serial #: 066536816
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 2 WS-X5530 011683214 Hw : 3.0
Fw : 3.1.2
Fw1: 4.2(1)
Sw : 5.2(1)
2 12 WS-X5011 010968399 Hw : 4.1
Fw : 2.3(1)
Sw : 5.2(1)
3 12 WS-X5011 009685013 Hw : 4.0
Fw : 2.3(1)
Sw : 5.2(1)
4 24 WS-X5237 022153855 Hw : 1.0
Fw : 4.5(2)
Sw : 5.2(1)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 32640K 17017K 15623K 8192K 4904K 3288K 512K 149K 363K
Uptime is 22 days, 4 hours, 27 minutes
Cuautitlan-MDF2 (enable) show module
Mod Slot Ports Module-Type Model Status
--- ---- ----- ------------------------- ------------------- --------
1 1 2 100BaseFX MMF Supervisor WS-X5530 ok
2 2 12 10BaseFL Ethernet WS-X5011 ok
3 3 12 10BaseFL Ethernet WS-X5011 ok
4 4 24 unknown WS-X5237 ok
Mod Module-Name Serial-Num
--- ------------------- --------------------
1 00011683214
2 00010968399
3 00009685013
4 00022153855
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-50-80-9d-7e-00 to 00-50-80-9d-81-ff 3.0 3.1.2 5.2(1)
2 00-10-7b-a7-a4-78 to 00-10-7b-a7-a4-83 4.1 2.3(1) 5.2(1)
3 00-10-7b-a6-f3-60 to 00-10-7b-a6-f3-6b 4.0 2.3(1) 5.2(1)
4 00-01-c9-bc-97-28 to 00-01-c9-bc-97-3f 1.0 4.5(2) 5.2(1)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- -------- --------- ---------- ------
1 NFFC WS-F5521 0011680762 1.1
1 uplink WS-U5533 0011434942 1.0
