Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Catalyst 5505

We have a catalyst 5505, and we are installing a modulo WS-x5237-fx-mt the problem is that the modulo appears like unknow in the system. I enclose an estatus

of what shows

WS-C5505 Software, Version McpSW: 5.2(1) NmpSW: 5.2(1)

Copyright (c) 1995-1999 by Cisco Systems

NMP S/W compiled on Sep 30 1999, 17:23:24

MCP S/W compiled on Sep 30 1999, 17:19:44

System Bootstrap Version: 3.1.2

Hardware Version: 1.0 Model: WS-C5505 Serial #: 066536816

Mod Port Model Serial # Versions

--- ---- ---------- --------- ----------------------------------------

1 2 WS-X5530 011683214 Hw : 3.0

Fw : 3.1.2

Fw1: 4.2(1)

Sw : 5.2(1)

2 12 WS-X5011 010968399 Hw : 4.1

Fw : 2.3(1)

Sw : 5.2(1)

3 12 WS-X5011 009685013 Hw : 4.0

Fw : 2.3(1)

Sw : 5.2(1)

4 24 WS-X5237 022153855 Hw : 1.0

Fw : 4.5(2)

Sw : 5.2(1)

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 32640K 17017K 15623K 8192K 4904K 3288K 512K 149K 363K

Uptime is 22 days, 4 hours, 27 minutes

Cuautitlan-MDF2 (enable) show module

Mod Slot Ports Module-Type Model Status

--- ---- ----- ------------------------- ------------------- --------

1 1 2 100BaseFX MMF Supervisor WS-X5530 ok

2 2 12 10BaseFL Ethernet WS-X5011 ok

3 3 12 10BaseFL Ethernet WS-X5011 ok

4 4 24 unknown WS-X5237 ok

Mod Module-Name Serial-Num

--- ------------------- --------------------

1 00011683214

2 00010968399

3 00009685013

4 00022153855

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-50-80-9d-7e-00 to 00-50-80-9d-81-ff 3.0 3.1.2 5.2(1)

2 00-10-7b-a7-a4-78 to 00-10-7b-a7-a4-83 4.1 2.3(1) 5.2(1)

3 00-10-7b-a6-f3-60 to 00-10-7b-a6-f3-6b 4.0 2.3(1) 5.2(1)

4 00-01-c9-bc-97-28 to 00-01-c9-bc-97-3f 1.0 4.5(2) 5.2(1)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC WS-F5521 0011680762 1.1

1 uplink WS-U5533 0011434942 1.0

1 REPLY
Cisco Employee

Re: Catalyst 5505

WS-X5237-FX-MT needs a minimum CAT OS 5.4(2). Upgrade your switch to 5.5(16) which is the latest general deplyoment.

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat5000/c5krn/sw_rns/78_6583.htm#xtocid6

292
Views
0
Helpful
1
Replies
CreatePlease to create content