12-16-2005 02:40 AM - edited 03-03-2019 01:09 AM
Hi,
I have problem with my Supervidor card. I have card WS-X6408A-GBIC and when I see "sh port" any port is "notconnect", but I yes have connect and OK the port... this problem is with any port...
any idea ?
Software CatOs version is 7.6.13
WS-C6506 Software, Version NmpSW: 7.6(13)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Jul 7 2005, 13:44:29
System Bootstrap Version: 5.3(1)
System Boot Image File is 'bootflash:cat6000-supk8.7-6-13.bin'
System Configuration register is 0x2
Hardware Version: 3.0 Model: WS-C6506 Serial #: TBA05150320
PS1 Module: WS-CAC-1300W Serial #: ACP04520833
PS2 Module: WS-CAC-1300W Serial #: ACP04520479
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------
1 2 WS-X6K-SUP1A-2GE SAD05080U51 Hw : 7.0
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 7.6(13)
Sw1: 7.6(13)
WS-F6K-PFC SAD05080Z23 Hw : 1.1
Sw :
WS-X6K-SUP1A-2GE SAD05080U51 Hw : 7.0
Sw :
3 48 WS-X6348-RJ-45 SAD05060VGV Hw : 1.5
Fw : 5.4(2)
Sw : 7.6(13)
4 48 WS-X6148-GE-TX SAL09211VYE Hw : 1.1
Fw : 7.2(1)
Sw : 7.6(13)
5 8 WS-X6408A-GBIC SAD04480HNK Hw : 1.3
Fw : 5.4(2)
Sw : 7.6(13)
15 1 WS-F6K-MSFC2 SAD05080RMG Hw : 1.2
Fw : 12.1(4)E1
Sw : 12.1(4)E1
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65408K 46615K 18793K 16384K 10969K 5415K 512K 322K 190K
12-16-2005 06:07 AM
What do you connect the ports on WS-X6408A card to? Can you do a loopback test on the 6500 itself and see if the ports show connected? For example, have port 4/1 and 4/2 in the same VLAN and connect 4/1 to 4/2.
Also, on a side note, you are running 7.6(13) on a Sup1a with 64MB DRAM. Note that this release needs 128MB DRAM.
12-16-2005 09:05 AM
I'm connecting server with card Intel. I go the test with loopback.
for the use of memory is correct, but in this moment the pick of use is of 10 %. Also I thing that can be the Supervisor card in harware.
regards
12-26-2005 07:42 AM
Hi,
I have the same problem... I have this counters in any interfaces Giga. Only module Giga
12 dot3StatsSymbolErrors = 9
0 txPause = 0
1 rxPause = 0
0 rxTotalDrops = 0
1 rxFIFOFull = 0
2 rxBadCode = 9
I can solve this problem ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: