Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 6500 ans Supervidor 1

Hi,

I have problem with my Supervidor card. I have card WS-X6408A-GBIC and when I see "sh port" any port is "notconnect", but I yes have connect and OK the port... this problem is with any port...

any idea ?

Software CatOs version is 7.6.13

WS-C6506 Software, Version NmpSW: 7.6(13)

Copyright (c) 1995-2005 by Cisco Systems

NMP S/W compiled on Jul 7 2005, 13:44:29

System Bootstrap Version: 5.3(1)

System Boot Image File is 'bootflash:cat6000-supk8.7-6-13.bin'

System Configuration register is 0x2

Hardware Version: 3.0 Model: WS-C6506 Serial #: TBA05150320

PS1 Module: WS-CAC-1300W Serial #: ACP04520833

PS2 Module: WS-CAC-1300W Serial #: ACP04520479

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------

1 2 WS-X6K-SUP1A-2GE SAD05080U51 Hw : 7.0

Fw : 5.3(1)

Fw1: 5.4(2)

Sw : 7.6(13)

Sw1: 7.6(13)

WS-F6K-PFC SAD05080Z23 Hw : 1.1

Sw :

WS-X6K-SUP1A-2GE SAD05080U51 Hw : 7.0

Sw :

3 48 WS-X6348-RJ-45 SAD05060VGV Hw : 1.5

Fw : 5.4(2)

Sw : 7.6(13)

4 48 WS-X6148-GE-TX SAL09211VYE Hw : 1.1

Fw : 7.2(1)

Sw : 7.6(13)

5 8 WS-X6408A-GBIC SAD04480HNK Hw : 1.3

Fw : 5.4(2)

Sw : 7.6(13)

15 1 WS-F6K-MSFC2 SAD05080RMG Hw : 1.2

Fw : 12.1(4)E1

Sw : 12.1(4)E1

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65408K 46615K 18793K 16384K 10969K 5415K 512K 322K 190K

3 REPLIES
Cisco Employee

Re: Catalyst 6500 ans Supervidor 1

What do you connect the ports on WS-X6408A card to? Can you do a loopback test on the 6500 itself and see if the ports show connected? For example, have port 4/1 and 4/2 in the same VLAN and connect 4/1 to 4/2.

Also, on a side note, you are running 7.6(13) on a Sup1a with 64MB DRAM. Note that this release needs 128MB DRAM.

New Member

Re: Catalyst 6500 ans Supervidor 1

I'm connecting server with card Intel. I go the test with loopback.

for the use of memory is correct, but in this moment the pick of use is of 10 %. Also I thing that can be the Supervisor card in harware.

regards

New Member

Re: Catalyst 6500 ans Supervidor 1

Hi,

I have the same problem... I have this counters in any interfaces Giga. Only module Giga

12 dot3StatsSymbolErrors = 9

0 txPause = 0

1 rxPause = 0

0 rxTotalDrops = 0

1 rxFIFOFull = 0

2 rxBadCode = 9

I can solve this problem ?

132
Views
0
Helpful
3
Replies
CreatePlease login to create content