05-06-2006 10:52 AM - edited 03-03-2019 03:06 AM
Hi all,
According to the data sheet, SUP32 provides 32Gbps and 15Mpps, is it per system basis?
If so, then it cannot allocate dedicated bandwidth per slot?
Is it mean that SUP32 cannot support, e.g. 48-port 1000BaseT wire-speed?
I am confused about SUP32 architecture.
Thanks a lot in advance.
Best Regards,
mak
Solved! Go to Solution.
05-07-2006 06:44 AM
Mak,
Sup32 supports only 32 GBPS backplane forwarding bandwidth. There will be an oversubscription of ports for the above module.
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_qanda_item0900aecd80350bfc.shtml
HTH, Please rate if it does.
-amit singh
05-07-2006 06:44 AM
Mak,
Sup32 supports only 32 GBPS backplane forwarding bandwidth. There will be an oversubscription of ports for the above module.
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_qanda_item0900aecd80350bfc.shtml
HTH, Please rate if it does.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide