Catalyst 6500 with Sup 720 appear error msg about fabric channel
My Cat 6513 with Sup 720 appear error msg
Jul 31 17:02:22.981: SP: Fabric endpoint of Channel 3 lost Sync. to Lower fabric and trying to recover now!
Jul 31 17:12:55.123: SP: Linecard endpoint of Channel 3 lost Sync. to Lower fabric and trying to recover now!
I have no idea about this error but no any problems or any complain from users. So, I have no idea that this error is just warning or critical error. Anyone, who know about this error, please give me some advise.
Re: Catalyst 6500 with Sup 720 appear error msg about fabric cha
show fabric errors >> see if there are kind of errors.
show fabric channel-counters >> see if there are kind of errors.
sho fabric fpoe map >> To see which line card is mapped to channel 3.
If you see errors from show fabric error and channel-counters and it maps to the slot number on fpoe map. Suggestion is to re-seat that line card, it might not be seated properly or the line card channel is stuck hence losing sync with the fabric. Once the card is reseated please check "sh diag all" for any failures.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...