Catalyst 6509 and WS-X6148-RJ45V

[nuno.santos]

I have the following scenario:

A catalyst 6509 with a supervisor 1A-2GE and a cat6000-sup.6-3-3.bin as catOS. When i insert the WS-X6148-RJ45V module, i registered the following console output: MODULE NOT SUPPORTED. Should i made a CatOS upgrade? And in this case to which version?

Nuno Santos

[bsivasub]

yes, to use 6148, you need 7.2.2 or higher

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#xtocid6

[pflunkert]

Hi,

you must use the required CatOS 7.2(2). But with this CatOs i have problems. The recommended version is CatOs 7.3(2) and bootRom version 6.4(1).

You can verify this with the cisco tool "software advisor".

[Prashanth Krishnappa]

We now also have 7.4(2) on CCO. 7.4(x) should be a better release to stay in. The release notes are at

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm