Hi
We have a catalyst 6509 switch with a Sup1 / MSFC / PFC card and planning to upgrade from Cat OS to IOS. We would like to know if we can upgrade the switch running the following configuration to IOS.
Mod Slot Ports Module-Type Model Status
--- ---- ----- ------------------------- ------------------- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC ok
3 3 16 1000BaseSX Ethernet WS-X6416-GE-MT ok
4 4 48 10/100BaseTX (RJ-45) WS-X6248-RJ-45 ok
Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD040304KJ
15 SAD04010CD5
3 SAD040906S4
4 SAD04080CNF
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------
1 00-d0-bc-f4-41-76 to 00-d0-bc-f4-41-77 3.1 5.3(1) 5.3(2)CSX
00-d0-bc-f4-41-74 to 00-d0-bc-f4-41-75
00-d0-00-cc-c4-00 to 00-d0-00-cc-c7-ff
15 00-d0-bc-f4-41-78 to 00-d0-bc-f4-41-b7 1.3 12.0(7)XE2 12.0(7)XE2,
3 00-30-96-2f-32-50 to 00-30-96-2f-32-5f 1.0 5.3(1) 5.3(2)CSX
4 00-30-19-c7-d2-90 to 00-30-19-c7-d2-bf 1.1 4.2(0.24)V 5.3(2)CSX
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L3 Switching Engine WS-F6K-PFC SAD040202BA 1.0
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff 671e2eaa 49e1e4 25 4579681 Dec 31 1999 23:59:59 cat6000-sup.
5-3-2-CSX.bin
Any assistance will be appreciated.
Thanks
Kumar
