01-13-2006 01:48 PM - edited 03-03-2019 01:26 AM
I'm trying to hang an unmanaged switch (netgear FS108)off this switch but with little success. I've configured the port on the Express 500 as a switch port but nodes connecting through the unmanaged switch can't fully browse nor can they receive DHCP addresses. Is there someway to make this work or are these Netgear switches simply not supported and won't work period?
01-13-2006 04:11 PM
The SmartPort roles are designed to work with Cisco devices, you will have to try different roles with the particular switch you are using, please try the router role first.
01-16-2006 02:43 PM
Yup, that worked. I assume the same issue applies to the 'server' port setting. If I've created multiple virtual servers each with their own unique IP address, the 'server' port settings spits back an error not allowing multiple connections through the same port.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide