cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
277
Views
0
Helpful
2
Replies

CBWFQ and policing

m.baker
Level 1
Level 1

Hi,

On a 7500 router , If I have two Class defined within a policy and if I reserve 50% of the bandwidth to each class using the bandwidth statement, would one class benefit if I police traffic in the other class to a max of 50% of bandwidth ?

I do not have policing in place right now and if one class has more traffic then 50% to send, it seems like the other class is slower (even though it should be garanteed 50% of bandwidth and has less then that to send)....Any explanation for this ?

Thanks

2 Replies 2

ebreniz
Level 6
Level 6

when ever you configure the qos according to the percentage configured its acts on the available bandwidth. Show interface can give the bw as well as available bandwidth . So coming up with a right solution without more details is difficult, I can suggest you some links which can help in troubleshooting the problem.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800bd8f0.html

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml

actually. My problem on the slow links is large packets are delaying my slow packets because of serialization delays....LFi fixed my problem...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: