Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CBWFQ and policing

Hi,

On a 7500 router , If I have two Class defined within a policy and if I reserve 50% of the bandwidth to each class using the bandwidth statement, would one class benefit if I police traffic in the other class to a max of 50% of bandwidth ?

I do not have policing in place right now and if one class has more traffic then 50% to send, it seems like the other class is slower (even though it should be garanteed 50% of bandwidth and has less then that to send)....Any explanation for this ?

Thanks

2 REPLIES
Silver

Re: CBWFQ and policing

when ever you configure the qos according to the percentage configured its acts on the available bandwidth. Show interface can give the bw as well as available bandwidth . So coming up with a right solution without more details is difficult, I can suggest you some links which can help in troubleshooting the problem.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800bd8f0.html

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml

New Member

Re: CBWFQ and policing

actually. My problem on the slow links is large packets are delaying my slow packets because of serialization delays....LFi fixed my problem...

137
Views
0
Helpful
2
Replies
CreatePlease to create content