If you have two 3550 connected via two wireless bridges then you will see the directly connected bridge in the show CDP, not the opposite switch (NB: if the bridges are 340 bridges --> they don't support CDP).
Two 3550 directly connected with an ISL trunk will exchange CDP packets on the management VLAN, ie VLAN1 by default (unless CDP is disabled on the switches).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...