I had a Catalyst 6509 connected to a Catalyst 4000, the 6509 is the VTP Server and the Cat4000 is a VTP Transparent, so i only wants to deliver the vlan 10 to the cat4000, but when i do that this message appears
%CDP-4-NVLANMISMATCH:Native vlan mismatch detected on port 1/1
The catalyst 4000 have all the ports in vlan 1, so how can i disable that message without changing the vlan in the ports of the cat 40000
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...