Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

cef adjacency table for ethernet

Should I see MAC address in the adjacency table?But i didn't see them .

r4#sh ip cef adjacency ethernet 0/1 10.1.23.3 de

IP CEF with switching (Table Version 14), flags=0x0

14 routes, 0 reresolve, 0 unresolved (0 old, 0 new)

17 leaves, 12 nodes, 14588 bytes, 17 inserts, 0 invalidations

0 load sharing elements, 0 bytes, 0 references

universal per-destination load sharing algorithm, id 0F5D17F5

2 CEF resets, 0 revisions of existing leaves

refcounts: 1069 leaf, 1055 node

Adjacency Table has 3 adjacencies

10.1.23.3/32, version 7, cached adjacency 10.1.23.3

0 packets, 0 bytes

via 10.1.23.3, Ethernet0/1, 0 dependencies

next hop 10.1.23.3, Ethernet0/1

valid cached adjacency

10.1.37.0/24, version 11, cached adjacency 10.1.23.3

0 packets, 0 bytes

via 10.1.23.3, Ethernet0/1, 0 dependencies

next hop 10.1.23.3, Ethernet0/1

valid cached adjacency

10.1.38.0/24, version 10, cached adjacency 10.1.23.3

0 packets, 0 bytes

via 10.1.23.3, Ethernet0/1, 0 dependencies

next hop 10.1.23.3, Ethernet0/1

valid cached adjacency

thanks

1 REPLY
Cisco Employee

Re: cef adjacency table for ethernet

You have to use the "sh adj e0/1" to see the L2 rewrite information in the adjacency table.

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
194
Views
0
Helpful
1
Replies
CreatePlease to create content