cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
199
Views
0
Helpful
2
Replies

CEF on 2610

joytaylor
Level 1
Level 1

Anybody knows if the 2610 is capable of doing CEF. How much memory and what IOS do I need?

Thank you,

2 Replies 2

thisisshanky
Level 11
Level 11

IP feature set is enough to support CEF. A min IOS version of 12.0(1)T would be needed from the IP feature set to run CEF. 12.0(1)T IP feature set, would require, 16 MB flash, 4 MB ram. 2610 is capable of running CEF.

The above are just the min requirements for running CEF on 2610. Any IOS above this version should support CEF.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

tepatel
Cisco Employee
Cisco Employee

Here is the best link for "CEF on 2600 routers" which has all the details about it. Locate cef switching.

http://www.cisco.com/warp/public/63/2600_architecture_23852.html

For ios support, you can find it by yourself..

For that you need to use the "feature nevigator" to see what is the minimum release a featuer like cef is supported on a platform. You will see that at

http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl

Click on "feature" and then on "C" and locate CEF/dCEF and "add" and continue. Once the result is diaplayed, you can select platform as well to get the min release.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: