Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Centauri - Failure

Hi,

this is part of my NVRAM log of a Catalyst 6500, Supervisory 1A 2GE , with a MSFC 2 installed, after I tried to change a redundant Supervisory, which was total desaster, and didn´t work at all.

This is now what´s left: The NVRAM log:

I was running the 6.3.5, the MSFC2 was properly configured.

Can anyone help me with this error messages:

--- Thank you -----

Loaded NMP version: 6.3(5)

Reload same NMP version count: 6

Last software reset by user: 10/5/2002,06:05:09

Last Exception occurred on Oct 05 2002 08:35:25 ...

Software version = 6.3(5)

Error Msg:

PID = 9 SL_TASK

EPC: BFC00380

Stack content:

sp+00: 0000000E 41000040 A0005EA8 A0005EA8

sp+10: BFC029A0 BFC0280C BFC20264 BFC00380

sp+20: A0005E68 A0005EA8 0000000E 41000040

sp+30: A0005EA8 00000000 BFC00E4C 00000000

sp+40: 00000000 00000000 00000000 00000000

sp+50: 00000000 00000408 00000000 00000408

sp+60: 00000000 00000000 00000000 00000000

sp+70: 00000000 00000026 FFFFFFFF A0005E14

sp+80: 00000000 00100000 00000000 00008814

sp+90: FFFFFFFF 8002DE23 00000000 00000003

sp+A0: 00000004 01001011 00000000 0000000C

sp+B0: 00000000 00010010 00000000 00006DB2

sp+C0: 00000000 0000000E 00000000 41000040

sp+D0: FFFFFFFF A0005EA8 00000000 00000000

sp+E0: 00000000 00000000 00000000 00000000

sp+F0: 00000000 00000000 00000000 000078B4

Register content:

Status: 24510006 Cause: 00008814

AT: 00000000

V0: 00000408 V1: 00000408

A0: 00000000 A1: 00000000

A2: 00000026 A3: A0005E14

T0: 00100000 T1: 00008814

T2: 8002DE23 T3: 00000003

T4: 01001011 T5: 0000000C

T6: 00010010 T7: 00006DB2

S0: 0000000E S1: 41000040

S2: A0005EA8 S3: 00000000

S4: 00000000 S5: 00000000

S6: 00000000 S7: 00000000

T8: 82935B52 T9: 82935B3C

K0: 80005FC8 K1: A0005E68

GP: 811EFB70 SP: A0005E68

S8: A0005E68 RA: 8002DE24

HIGH: BFC01540 LOW: 00A80000

BADVADDR: 8002DE23 ERR EPC: BFC00380

EOBC Exceptions/Hang: 0

Heap Memory Log:

Corrupted Block = none

NVRAM log:

01. 10/7/2002,13:51:04: Centauri (Reg, Val): :(0x180 to 0x183 : 0x4000, 0x0, 0x0, 0x0, 0x1b3 : 0xd5ff28a1)

02. 10/7/2002,13:51:04: perseus_intr_hdlr:Perseus:88 0

03. 10/7/2002,13:51:04: perseus_intr_hdlr:Per RFP:0x8400 LQP:0x1818181 OIP:0x10001 Intr:0x88

04. 10/7/2002,13:51:05: cafe2_intr_hdlr:Interrupt Status 0X4000, L2Seq 0X0, L3Seq 0X0, L3Par 0X0, Cntl 0Xd5ff28a1

05. 10/7/2002,13:51:05: cafe2_intr_hdlr:Interrupt Status 0X0, L2Seq 0X0, L3Seq 0X3, L3Par 0X7f, Cntl 0Xd5ff28a1

06. 10/7/2002,13:51:05: Centauri (Reg, Val): :(0x4 : 0x88, 0x1a : 0x0)

07. 10/7/2002,13:51:05: Centauri (Reg, Val): :(0x114 to 0x118 : 0x8400, 0x1818181, 0x10001, 0x88, 0xd5ff28a1)

08. 10/7/2002,13:51:05: Centauri (Reg, Val): :(0x180 to 0x183 : 0x4000, 0x0, 0x0, 0x0, 0x1b3 : 0xd5ff28a1)

09. 10/7/2002,13:51:05: perseus_intr_hdlr:Perseus:88 0

10. 10/7/2002,13:51:05: perseus_intr_hdlr:Per RFP:0x8400 LQP:0x1818181 OIP:0x10001 Intr:0x88

11. 10/7/2002,13:51:06: cafe2_intr_hdlr:Interrupt Status 0X4000, L2Seq 0X0, L3Seq 0X0, L3Par 0X0, Cntl 0Xd5ff28a1

12. 10/7/2002,13:51:06: cafe2_intr_hdlr:Interrupt Status 0X0, L2Seq 0X0, L3Seq 0X4, L3Par 0X7f, Cntl 0Xd5ff28a1

13. 10/7/2002,13:51:06: Centauri (Reg, Val): :(0x4 : 0x88, 0x1a : 0x0)

14. 10/7/2002,13:51:06: Centauri (Reg, Val): :(0x114 to 0x118 : 0x8400, 0x1818181, 0x10001, 0x88, 0xd5ff28a1)

15. 10/7/2002,13:51:06: Centauri (Reg, Val): :(0x180 to 0x183 : 0x4000, 0x0, 0x0, 0x0, 0x1b3 : 0xd5ff28a1)

16. 10/7/2002,13:51:06: perseus_intr_hdlr:Perseus:88 0

17. 10/7/2002,13:51:06: perseus_intr_hdlr:Per RFP:0x8400 LQP:0x1818181 OIP:0x10001 Intr:0x88

18. 10/7/2002,13:51:07: cafe2_intr_hdlr:Interrupt Status 0X4000, L2Seq 0X0, L3Seq 0X0, L3Par 0X0, Cntl 0Xd5ff28a1

19. 10/7/2002,13:51:07: cafe2_intr_hdlr:Interrupt Status 0X0, L2Seq 0X0, L3Seq 0X3, L3Par 0X7f, Cntl 0Xd5ff28a1

20. 10/7/2002,13:51:07: Centauri (Reg, Val): :(0x4 : 0x88, 0x1a : 0x0)

21. 10/7/2002,13:51:07: Centauri (Reg, Val): :(0x114 to 0x118 : 0x8400, 0x9898989, 0x10001, 0x88, 0xd5ff28a1)

22. 10/7/2002,13:51:07: Centauri (Reg, Val): :(0x180 to 0x183 : 0x4000, 0x0, 0x0, 0x0, 0x1b3 : 0xd5ff28a1)

23. 10/7/2002,13:51:07: perseus_intr_hdlr:Perseus:88 0

24. 10/7/2002,13:51:07: perseus_intr_hdlr:Per RFP:0x38103 LQP:0x1818181 OIP:0x10001 Intr:0x88

25. 10/7/2002,13:51:08: cafe2_intr_hdlr:Interrupt Status 0X4000, L2Seq 0X0, L3Seq 0X0, L3Par 0X0, Cntl 0Xd5ff28a1

26. 10/7/2002,13:51:08: cafe2_intr_hdlr:Interrupt Status 0X0, L2Seq 0X0, L3Seq 0X5, L3Par 0X7f, Cntl 0Xd5ff28a1

27. 10/7/2002,13:51:08: Centauri (Reg, Val): :(0x4 : 0x88, 0x1a : 0x0)

28. 10/7/2002,13:51:08: Centauri (Reg, Val): :(0x114 to 0x118 : 0x8400, 0x1818181, 0x10001, 0x88, 0xd5ff28a1)

29. 10/7/2002,13:51:08: Centauri (Reg, Val): :(0x180 to 0x183 : 0x4000, 0x0, 0x0, 0x0, 0x1b3 : 0xd5ff28a1)

30. 10/7/2002,13:51:08: perseus_intr_hdlr:Perseus:88 0

31. 10/7/2002,13:51:08: perseus_intr_hdlr:Per RFP:0x88408 LQP:0x3838383 OIP:0x30003 Intr:0x88

32. 10/7/2002,13:51:10: cafe2_intr_hdlr:Interrupt Status 0X4000, L2Seq 0X0, L3Seq 0X0, L3Par 0X0, Cntl 0Xd5ff28a1

33. 10/7/2002,13:51:10: cafe2_intr_hdlr:Interrupt Status 0X0, L2Seq 0X0, L3Seq 0X7, L3Par 0X7f, Cntl 0Xd5ff28a1

34. 10/7/2002,13:51:10: Centauri (Reg, Val): :(0x4 : 0x88, 0x1a : 0x0)

35. 10/7/2002,13:51:10: Centauri (Reg, Val): :(0x114 to 0x118 : 0x8400, 0x1818181, 0x10001, 0x88, 0xd5ff28a1)

36. 10/7/2002,13:51:10: Centauri (Reg, Val): :(0x180 to 0x183 : 0x4000, 0x0, 0x0, 0x0, 0x1b3 : 0xd5ff28a1)

37. 10/7/2002,13:51:10: perseus_intr_hdlr:Perseus:88 0

38. 10/7/2002,13:51:10: perseus_intr_hdlr:Per RFP:0x88408 LQP:0x7878787 OIP:0x70007 Intr:0x88

2 REPLIES
Bronze

Re: Centauri - Failure

Here is the stack decoder...

http://www.cisco.com/cgi-bin/Support/Stackdecoder/stackdecoderinput.pl

Go to this link and paste the stack dump and version info to decode the trace.

Cisco Employee

Re: Centauri - Failure

The Stack decoder you posted is for IOS only and will NOT work for CAT OS. We do not have a stack decoder for CAT OS. If you are seeing this messages continually, I suggest that you open a TAC Case

204
Views
0
Helpful
2
Replies