Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Channelized DS3 / ISDN PRI - Interface for 72xx

We are trying to use a channelized DS3/PRI for isdn back up. The router platform is a 7206vxr and we purchased the PA-MC-2T3+ to connect. Per Cisco that interface will not create PRI controllers just T1 controllers. The PA-MC-T3 is said to support PRIs on a channelized DS3, but we can find no confirmation on CCO. Has anyone used the PA-MC-T3 for PRIs??

1 REPLY
Silver

Re: Channelized DS3 / ISDN PRI - Interface for 72xx

DS3 is upported in the below cards. Check the link also

PA-T3+, PA-T3+=

One-port clear-channel DS3 port adapter

Recommended for high-performance uplink and trunking applications

PA-2T3+

PA-2T3+=

Two-port clear-channel DS3 port adapter

Recommended for high-density or T3 line aggregation applications

http://www.cisco.com/warp/public/cc/pd/ifaa/pa/prodlit/pods3_ds.htm

664
Views
0
Helpful
1
Replies
CreatePlease to create content