Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

CHAP authentication failure:

Hello all,

I try to configure DDR.

When using ppp chap hostname + password on the BRI interface, all is working just fine.

When using the same configuration with dialer the remore router recieves Authentication failure.

Is there any diff between BRI and dialer ppp chap authentication?

10x!

2 REPLIES
New Member

Re: CHAP authentication failure:

how are you defining the username and password on the routers.

*** IF USING Dialer MAPS

ROUTER A Config

!

username Routerb password cisco

!

!

Int bri0

dialer map ip 1.1.1.1 name Routerb broadcast 1122334455

!--> Additional Parameters <--

---Router B---

ROUTER A Config

!

username Routera password cisco

!

!

int bri0

dialer map ip 1.1.1.2 name Routera broadcast 1122334466

!

!--> Additional Parameters <--

*** IF USING DIALER PROFILES

RouterA

!

username Routerb password cisco

!

!

dialer pool 1

dialer remote-name Routerb

dialer string 1122334455

!

!--- Aditional Parameters ----

!

Int bri0

dialer pool-member 1

!--- Aditional Parameters ----

********************************

username Routera password cisco

!

!

RouterB

dialer remote-name Routera

dialer string 1122334466

New Member

Re: CHAP authentication failure:

10x!

Using BRI only work perfect!

But using dialer with same configuration does not work. It fales on chap authentication.

What is the diffrance in ppp chap authentication between BRI and dialer?

123
Views
0
Helpful
2
Replies
CreatePlease to create content