Enable password are of two types. Clear text and Secret passwords. Its advisable to use secret enable passwords. These can be enabled by using,
enable secret When this statement appears on the running config, it appears encrypted. I would say if you are seeing a clear text enabled password (which is enabled using "enable password " command, remove that and use secret password instead.
If you want to see all passwords in your router to be encrypted while viewing, you can use,
Service password-encryption in the global config mode.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...