Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 1720 Question - NAT

Presently my Cicso 1720 is NAT'ing:

interface FastEthernet0

ip address 10.0.10.1 255.255.255.0

ip nat inside

no ip route-cache

speed auto

Can I add the ip address 192.168.1.1 255.255.255.0 to the mix? I want to create a new network segment on the LAN.

Thanks

Jonathan

2 REPLIES
New Member

Re: Cisco 1720 Question - NAT

Yes.. you can add the 192.168.1.1/24 as a secondary address on FE0... and for connections to the outside world you will need to add them to the NAT'ing config also.. You just need to add the 192.168.1.0/24 to the access-list already in used for the NAT..

Hope this may help..

New Member

Re: Cisco 1720 Question - NAT

interface FastEthernet0

ip address 10.0.10.1 255.255.255.0

ip address 192.168.1.1 255.255.255.0 secon

access-list 1 permit 192.168.1.1 0.0.255.255

92
Views
0
Helpful
2
Replies