Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4

My 1760 router will not recognize a wic1-dsu-t1-v2 card in slots 3 or 4. They only work in slots 1 & 2. Never saw this before where the same card would not work in different slots.

Need assistance.

Thanks,

Ron

Router#show version

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-IPBASE-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Tue 20-Jul-04 07:00 by kellythw

Image text-base: 0x80008120, data-base: 0x80C74650

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

Router uptime is 20 minutes

System returned to ROM by power-on

System image file is "flash:c1700-ipbase-mz.123-6c.bin"

cisco 1760 (MPC860P) processor (revision 0x500) with 55598K/9938K bytes of memory.

Processor board ID FOC0849230K (3846615071), with hardware revision 0000

MPC860P processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

WIC T1-DSU

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Router#show flash

System flash directory:

File  Length   Name/status

  1   7517112 c1700-ipbase-mz.123-6c.bin 

[7517176 bytes used, 25775112 available, 33292288 total]

32768K bytes of processor board System flash (Read/Write)

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Router#show diag

Slot 0:

        C1760 1FE VE 4SLOT DV Mainboard Port adapter, 3 ports

        Port adapter is analyzed

        Port adapter insertion time unknown

        EEPROM contents at hardware discovery:

        Hardware Revision        : 5.0

        PCB Serial Number        : FOC0849230K

        Part Number              : 73-7167-05

        Board Revision           : B0

        Fab Version              : 04

        Product (FRU) Number     : CISCO1760

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 03 16 41 05 00 C1 8B 46 4F 43 30 38 34

          0x10: 39 32 33 30 4B 82 49 1B FF 05 42 42 30 02 04 FF

          0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC/VIC Slot 0:

        FT1 4351

        Daughter card-Version 4 TLV Cookie Format

        Hardware Revision        : 1.1

        PCB Serial Number        : FOC09053XP1

        Part Number              : 73-8346-04

        Board Revision           : A0

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Deviation Number         : 0-0

        Product (FRU) Number     : WIC-1DSU-T1-V2     

        Top Assy. Part Number    : 800-22193-02

        CLEI Code                : IP4I380GAB

        WIC/VIC Slot 1:

        FT1 4351

        Daughter card-Version 4 TLV Cookie Format

        Hardware Revision        : 1.2

        PCB Serial Number        : FOC10073JND

        Part Number              : 73-8346-05

        Board Revision           : A0

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Deviation Number         : 0-0

        Product (FRU) Number     : WIC-1DSU-T1-V2     

        Top Assy. Part Number    : 800-22193-03

        CLEI Code                : IPUIAPRRAA

2 REPLIES

Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slot

Hi Ron,

Slots 3 & 4 are for VICs only.

Have a look at the Location/ Function table here:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml

cheers,

Seb.

New Member

Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slot

Thank you Seb !!!!!

492
Views
0
Helpful
2
Replies
CreatePlease to create content