cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
990
Views
0
Helpful
7
Replies

Cisco 1841 Installing Second T1(DSU/CSU) Card

sadik.bash
Level 1
Level 1

Hello,

I installed a new T1(DSU/CSU) card in SLOT 1 but it isn't being recognized. The T1 in SLOT 0  comes up, is configured, and working just fine. I can't figure out why the second T1 card isn't being recognized and doesn't come up in the list of interfaces.

I would really appreciate it if someone can assist me with this.

Best, ~zK

1 Accepted Solution

Accepted Solutions

        WIC/HWIC Slot 1:

        FT1 BT8360

        WIC module not supported/disabled in this slot

        Hardware revision 1.3           Board revision C0

        Serial number     22895038      Part number    800-03279-03

        FRU Part Number     WIC-1DSU-T1=     

        Test history      0x0           RMA number     00-00-00

        Connector type    Wan Module

        EEPROM format version 2

        EEPROM contents (hex):

          0x20: 02 11 01 03 01 5D 59 BE 50 0C CF 03 00 00 00 00

Thanks, ~sK

You need -V2 card.

View solution in original post

7 Replies 7

paolo bevilacqua
Hall of Fame
Hall of Fame

Post show ver, show diag.

Thaks for the report, Paolo.

Here is the output of the Show ver. Again, I have 2 WICs installed but only one is coming up.

SK-RTR-02#sh ver

Cisco IOS Software, 1841 Software (C1841-IPBASEK9-M), Engineering Special Version 12.4(15)T6b, 12.4(20091203:021420)

This software is supported for a limited time under special agreement with Cisco Systems, Inc. Ref. case #613034069

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Sat 05-Dec-09 13:23 by sande

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

SK-RTR-02 uptime is 0 minutes

System returned to ROM by power-on

System restarted at 11:54:35 PDT Mon Jul 15 2013

System image file is "flash:c1841-ipbasek9-mz.124-15.T6b.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.

Processor board ID

2 FastEthernet interfaces

1 Serial interface

WIC T1-DSU

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

31488K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


Much appreciated.

Best, ~sK

You did not post show diag as asked above.

Here is the show diag output:

SK-RTR-02#sho diag

Slot 0:

        C1841 2FE 2SLOT Mainboard Port adapter, 3 ports

        Port adapter is analyzed

        Port adapter insertion time unknown

        EEPROM contents at hardware discovery:

        Chassis MAC Address      : 0021.a018.3d16

        MAC Address block size   : 34

        PCB Serial Number        : FOC12464616

        Hardware Revision        : 7.0

        Part Number              : 73-8191-08

        Board Revision           : D0

        Top Assy. Part Number    : 800-23434-06

        Deviation Number         : 0

        Fab Version              : 04

        CLEI Code                : IPM7W00CRA

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Product (FRU) Number     : CISCO1841

        Version Identifier       : V05

        Processor type           : 86

        Chassis Serial Number    : FTX1249Y0H9

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF C3 06 00 21 A0 18 3D 16 43 00 22 C1 8B 46

          0x10: 4F 43 31 32 34 36 34 36 31 36 40 04 1B 41 07 00

          0x20: 82 49 1F FF 08 42 44 30 C0 46 03 20 00 5B 8A 06

          0x30: 88 00 00 00 00 02 04 C6 8A 49 50 4D 37 57 30 30

          0x40: 43 52 41 03 00 81 00 00 00 00 04 00 CB 89 43 49

          0x50: 53 43 4F 31 38 34 31 89 56 30 35 20 D9 02 C1 40

          0x60: 09 86 C2 8B 46 54 58 31 32 34 39 59 30 48 39 FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC/HWIC Slot 0:

        FT1 PMC4351

        Hardware Revision        : 1.2

        PCB Serial Number        : FOC10485X10

        Part Number              : 73-8346-05

        Board Revision           : A0

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Deviation Number         : 0-0

        Product (FRU) Number     : WIC-1DSU-T1-V2     

        Top Assy. Part Number    : 800-22193-03

        CLEI Code                : IPUIAPRRAA

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 00 52 41 01 02 C1 8B 46 4F 43 31 30 34

          0x10: 38 35 58 31 30 82 49 20 9A 05 42 41 30 03 00 81

          0x20: 00 00 00 00 04 00 80 00 00 00 00 CB 94 57 49 43

          0x30: 2D 31 44 53 55 2D 54 31 2D 56 32 20 20 20 20 20

          0x40: 20 C0 46 03 20 00 56 B1 03 C6 8A 49 50 55 49 41

          0x50: 50 52 52 41 41 FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC/HWIC Slot 1:

        FT1 BT8360

        WIC module not supported/disabled in this slot

        Hardware revision 1.3           Board revision C0

        Serial number     22895038      Part number    800-03279-03

        FRU Part Number     WIC-1DSU-T1=     

        Test history      0x0           RMA number     00-00-00

        Connector type    Wan Module

        EEPROM format version 2

        EEPROM contents (hex):

          0x20: 02 11 01 03 01 5D 59 BE 50 0C CF 03 00 00 00 00

Thanks, ~sK

        WIC/HWIC Slot 1:

        FT1 BT8360

        WIC module not supported/disabled in this slot

        Hardware revision 1.3           Board revision C0

        Serial number     22895038      Part number    800-03279-03

        FRU Part Number     WIC-1DSU-T1=     

        Test history      0x0           RMA number     00-00-00

        Connector type    Wan Module

        EEPROM format version 2

        EEPROM contents (hex):

          0x20: 02 11 01 03 01 5D 59 BE 50 0C CF 03 00 00 00 00

Thanks, ~sK

You need -V2 card.

Thanks, Paolo!

That solved the issue.

Best, ~sK

Thank you for the nice rating and good luck!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: