What card do I need to allow 4 POTS lines to come in for the integrated phone system?
Our office currently is using the Cisco UC320 W for our router and phone system. We are wanting to upgrade it so we can have VPN capabilities. I have found the Cisco 1941W that will do the same plus the VPN.
So we have cable coming in to a modem so it's being handed to the router via ethernet. I figured I could use one of the built in ports for internet on the 1941W. The other port will be for the lan. I will purchase the SSL VPN to get that working. Setup the wireless for the office on it. My only question is what card do I need to allow 4 POTS lines to come in for the integrated phone system?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...