Presently we have a cisco 2501 router connected to an external lease line for providing internet access on the serial port of the router. The Router is also connected to a Firewall Server via the ethernet port on the Router. Presently the we are unable to telnet into the router from anywhere on the network , even via the firewall server connected directly onto it. What we would like happen , is for us to be able to telnet into the router via only the firewall server connected directly onto it. Could someone provide some assistance please. Attached isa copy of the configuration of the router. Also the ip address of the ethernet port on the firewall server that the router is connected is 172.20.21.7.
I tried the commands listed and I was still unable to telnet into the router. I go the following error message " Connecting to 220.127.116.11.... Could not open a connection to host on port 23: Connect failed "
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.