Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cisco 2505 Hub

I am having trouble connecting to the hub ports on my Cisco 2505, i have tried with straight through cables, twisted, nothing seems to work, below is my curent config let me know if im doing something wrong

Current configuration:

!

version 11.0

service udp-small-servers

service tcp-small-servers

!

hostname RouterA

!

!

!

hub ether 0 1

link-test

auto-polarity

!

hub ether 0 2

link-test

auto-polarity

!

hub ether 0 3

link-test

auto-polarity

!

hub ether 0 4

link-test

auto-polarity

!

hub ether 0 5

link-test

auto-polarity

!

hub ether 0 6

link-test

auto-polarity

!

hub ether 0 7

link-test

auto-polarity

!

hub ether 0 8

link-test

auto-polarity

RouterA#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 3000 Software (IGS-IR-L), Version 11.0(8), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1996 by cisco Systems, Inc.

Compiled Sat 27-Apr-96 01:34 by vprasad

Image text-base: 0x03025184, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE

ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)

RouterA uptime is 17 hours, 54 minutes

System restarted by reload

System image file is "flash:igs-ir-l.110-8", booted via flash

cisco 2505 (68030) processor (revision K) with 6144K/2048K bytes of memory.

Processor board ID 02954648, with hardware revision 00000000

Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Primary Rate ISDN software, Version 1.0.

1 Ethernet/IEEE 802.3 interface.

8 Ethernet/IEEE 802.3 repeater ports.

2 Serial network interfaces.

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Thanks

Brian Butler

2 REPLIES

Re: cisco 2505 Hub

Remove the link-test command (ie. disable this feature if a device at the other end of the hub does not implement the link test function) and then try it (may need shut/no shut).

Hope it helps.

Steve

New Member

Re: cisco 2505 Hub

No that did not seem to do it.

458
Views
0
Helpful
2
Replies
CreatePlease to create content