Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2522 Booting Problems

Hi, upon bootup the router issues the following error & continues the exact process:

"System Bootstrap, Version 11.0(10c), SOFTWARE

Copyright (c) 1986-1996 by cisco Systems

2500 processor with 14336 Kbytes of main memory

Local Timeout (control reg=0x118) Error, address: 0x2130002 at 0x1010AA0 (PC)"

I tested the memory & its tests fine on another router. Can anyone shed some light on what I should next ...

Regards

Lincoln

9 REPLIES
New Member

Re: Cisco 2522 Booting Problems

New Member

Re: Cisco 2522 Booting Problems

Hi Prafuljaded,

thank you very much for the response. I really appreciate your time & effort.

I used the advise in the provided document but always end up with the same error msg. I'm guessing that this may have something to do with the mother board ...

Thanks

Lincoln

New Member

Re: Cisco 2522 Booting Problems

The document says to check whether its a software bug or any incompatible IOS bootup. Also check the ventilation and air conditioning.

New Member

Re: Cisco 2522 Booting Problems

At this popint in the boot process, the 2500 looks to flash for an IOS. There seems to be a problem with the flash memory itself, or possible curruption of the IOS stored in flash.

Try booting into ROM mode by issuing a break, and then try to reload an IOS.

Good luck,

Joe

New Member

Re: Cisco 2522 Booting Problems

in rom monitor mode

> o/r 0x2102

>

>i

i hope try with this

New Member

Re: Cisco 2522 Booting Problems

Have you tried replacing the flash?

New Member

Re: Cisco 2522 Booting Problems

Thanks for all the replies while I was away. I was on a weeks study leave & successfully passed the CCDA exam on Friday - what a load off my shoulders.

I did try the 0x2102 registry cmd & other combinations also, but did no help.

The memory & flash was swopped with working memory & flash but received the exact same error. It has got to be the mother board ...

zn
New Member

Re: Cisco 2522 Booting Problems

Now! God damn!

I encountered the exactly same promble of you!

My poor 2522! 8-(

New Member

Re: Cisco 2522 Booting Problems

Hi, I was in the end unable to resolve this problem. We suspect the board to be a problem as the flash & memory worked on another router ...

Regards

Lincoln

421
Views
3
Helpful
9
Replies